String trimmers will cut grass and milder substances — however if you would like something which can handle brush or a job that is more challenging, you might have chosen to install brush cutter blades on your routine trimmer. The Shakespeare brand brush cutter, offered by Yard Gear, is just one such heavy-duty cutter. The brush comes with bolts and nuts of different sizes, making it match on many distinct brands of trimmers.
Inspect the region near your current trimmer head, searching for a hole in. That hole is a feature which allows you to lock the trimmer shaft in place and unscrew the trimmer head. You’re going to require a set of pliers rather if you do not have a hole.
Insert a screwdriver into the pit if you have a hole, then turn the trimmer head to the left to loosen it and remove it. If you do not have that hole, wrap a pliers round the trimmer shaft underneath the trimmer head, as the trimmer head turns to the left to unscrew it and maintain the pliers tight. It has a extension screwed onto it ; turn that bolt extension to the left to remove it, showing a shorter shaft underneath if the shaft under the mind is about 1 inch.
Wear a pair of leather work gloves and maintain them on. The brush cutter’s blades can be really sharp and could cut you if you’re not careful.
Test the nuts that came to see which one fits by threading the nut on the shaft and deciding which one threads on with the match.
Set the end of the properly sized nut at the center of the brush into the hole, called the hex cavity.
Press the nut into the hex cavity with your pointer finger as the brush head turns onto the threads of your trimmer shaft. While you do this the trimmer shaft needs to be secured down, so at precisely the same time, you will need to have that screwdriver inserted to stabilize it, or you’ll have to grip the shaft still.
Look for any openings involving the trimmer and the brush head, on the trimmer head. If you find a gap, unscrew the brush head before replacing the brush head once 29, and insert one of the supplied washers. According to Yard Gear, you should use the supplied 1/4-inch washer for Stihl and Husqvarna brand trimmers. If there is still a lot of room there after installing the washer, add the supplied”adapter cup” to the shaft and then screw on the brush cutter. Ensure that the brush head is tightened to keep it.