How to Clean Mold from Plastic Shower Walls

The bacteria and mould which love the heat and heat of your shower stall can display virtually all of the colours of the rainbow, but in case you’ve got a psychedelic experience whenever you shower, you’re not cleaning often enough. Despite the near certainty that it will rise — given moment and humidity — mold isn’t that difficult to control, particularly in a bathtub which has plastic walls. A straightforward weekly remedy are able to keep your bathtub mold-free.

The Colors of Mold

The scariest mold is black, which is the color of approximately 50 species of Stachybortrys, the very poisonous mold you’re likely to find in your house. Black mold prefers to be behind the walls, however, because it feeds cellulose and requires a constant moisture distribution — not only large humidity. The mold on your shower walls may also be green, brown or any shade of red. It may even be white. The pink mold which you may see is not a fungus — it’s a type of airborne bacteria — but it may cause the same respiratory problems as true mold.

Killing Mold on Shower Walls

However much mold has exploded on your plastic shower walls, then it should not take more than 30 minutes of your time to eliminate it. You can kill it using a commercial toilet disinfectant, but normal household bleach is just as powerful. Mix a solution of 1 part bleach and 4 parts water and use it to spray the walls down. Give the bleach about 10 minutes to work; then scrub the walls down with a mild soap solution, such as an ounce of dishwashing detergent per gallon of water, and then rub. If you have a negative reaction to bleach, then disinfect with full-strength white vinegar instead.

Deep Cleaning

The mold will grow back if you don’t kill all of it, including the colonies that collect around the tap handle and shower mind and at the caulking around the borders of this stall. Spray these areas liberally with your mold-killing alternative; then scrub from the crevices and corners using a toothbrush. Despite your best efforts, you may not be able to receive all of the mold out of silicone caulking, and if you can’t, it’s ideal to re-caulk. That means removing all of the affected caulk, and also the simplest means to do it would be to cut it off with a knife; then, pull it off. Once it’s gone, disinfect the combined thoroughly before applying fresh material.

Mold Prevention

Keeping mold at bay is as straightforward as maintaining your bathtub walls dry when you aren’t showering and disinfecting them regularly. If you’ve got an exhaust fan in the bathroom, then make sure it’s running as you shower and for 20 to 30 minutes afterwards. If your toilet does not have a lover, keep air circulating with an open window. Set a spray bottle of white vinegar in an obvious place in the bathroom so you’ll remember to use it. Spraying the walls, followed by a thorough wiping and rinsing should ensure a mold-free encounter for anyone working with the bathtub.

See related